The DFW Handyman®Honest Craftsmanship.

Hiring and pricing

Do handymen charge by the hour or by the project?

Some jobs are billed by time, others at a set price. What drives the number, what a written scope should include, and how to compare two estimates fairly.

Your local expert

Hands-on since 1999 · About Daniel

Daniel Myers, founder of The DFW Handyman, by his work van
Daniel Myers, founder of The DFW Handyman
Short answerBoth. Some handymen bill for time plus materials; others quote a set price for each job, and many use whichever fits the task. Time billing suits small or unpredictable work. A set price suits work that can be fully seen and measured up front. More important than the model is a clear written scope, so you know exactly what is and isn't included.

Key takeaways

  • Time-and-materials billing fits diagnosis and unknowns; a set price fits work that is fully visible.
  • Access, condition, finish level, materials and the number of trips drive cost more than the task's name.
  • Ask about minimums, trip charges and how materials are billed before you book.
  • Compare estimates line by line on scope, not on the bottom number.
In this guide
  1. How time-and-materials billing works
  2. How a set price per job works
  3. What actually drives the cost
  4. Minimums, trip charges and materials
  5. How to compare two estimates fairly
  6. A surprisingly low number is a question, not a bargain

How time-and-materials billing works

With time-and-materials pricing, you pay for the hours on the job plus the cost of what goes into it. It is common for small jobs, for repairs where the cause isn't known yet, and for a mixed list where each item is quick but hard to price on its own.

The model is fair when it is transparent. Before work starts, ask how time is counted, whether travel or store runs are billed, and whether materials are charged at cost or with a markup. A good handyman will also tell you if a task is running longer than expected, before the extra time is spent.

How a set price per job works

A set price, also called a flat or project price, is quoted after the handyman has seen the job in person or in clear photos. Hanging a new interior door, mounting a TV on a stud wall, or building a set of floating shelves can all be priced this way. You know the number before work starts, and the risk of it taking longer sits with the handyman.

The trade-off is that a set price only holds for the scope it describes. Read what's written: does it include patching and paint after the repair, hauling away the old item, or the trim around the new door? If something hidden turns up, such as rot behind the trim, the price should change only after you've seen the problem and agreed to the new scope.

What actually drives the cost

Two jobs with the same name can be very different amounts of work. These are the things that move the price, whichever model is used:

  • Access and height. A fixture on a standard ceiling is a different job from one over a stairwell or in a tall foyer.
  • Condition of what's there. An unsupported ceiling box, a rotted sill or crumbling plaster adds work before the visible job can start.
  • Finish level. Paint-grade trim is quicker than stain-grade; matching an older profile takes more time than installing a stock one.
  • Materials. Who buys them, what quality, and whether a special part has to be ordered.
  • Number of trips. Drywall mud and paint need drying time; a part on order means a return visit.
  • Protection and cleanup. Floor runners, drop cloths and dust containment take time, and they are worth it.
  • Grouping. Several tasks in one visit usually cost less in total than the same tasks booked separately.

Want a clear scope before work starts? Tell Daniel about it

Minimums, trip charges and materials

Many handyman businesses have a minimum charge or a trip fee, because getting a stocked vehicle to your house costs the same whether the job is large or small. Neither is wrong, but you should know about it before anyone arrives. Ask directly: "Is there a minimum, a trip charge, or any fee I should expect?" If your job is a single small item, ask whether it makes sense to add a few others to the same visit. Most homes have a short list waiting somewhere.

On materials, agree on who buys what. If you're supplying a fixture, faucet or hardware, confirm the model with the handyman first so it fits what's on the wall. If they supply it, ask for the materials to be listed on the invoice. A receipt that shows labor and materials separately is a reasonable thing to expect.

How to compare two estimates fairly

When estimates differ widely, the scope is usually different, not the honesty. Line them up and check:

  • Do both include the same tasks, described in the same detail?
  • Are materials included, and at what quality?
  • Is surface prep, patching, painting and cleanup included or extra?
  • Who removes the old door, fixture or debris?
  • What happens if hidden damage is found?
  • Is the workmanship warrantied, and for how long?
  • What payment is expected before the work, and when is the balance due?

A surprisingly low number is a question, not a bargain

An estimate far below the others often leaves something out: prep, patching, protection, disposal or proper anchoring. Ask what isn't included and how they handle surprises. Be cautious with anyone who wants a large payment before any work or materials, insists on cash only, or won't put the scope in writing.

The DFW Handyman charges no added fees or surcharges. Send your list through Request service, with photos if you have them, and we'll explain how each item would be priced before anything is scheduled.

Frequently asked questions

Will the price change if the job takes longer than expected?
With time-and-materials billing, longer work costs more, so ask the handyman to check in before going past what was discussed. With a set price, the price should hold for the scope written down. It should change only if the scope changes, for example when hidden damage is found, and only after you have seen the problem and agreed.
Is it cheaper to book several small repairs at once?
Usually, yes. Each visit carries travel, setup, protection and cleanup, so grouping repairs spreads that across more work. Material runs can be combined too. Make one list, add a photo per item, and send it ahead so the handyman arrives with what the whole list needs.
Will I be charged if the problem can't be fixed?
Policies differ, so ask before the visit. Time spent diagnosing a problem is real work, and many handymen bill for it even when the answer is that a part must be ordered or a licensed trade is needed. A fair handyman explains this up front and tells you what they found, so the visit still gives you a clear next step.
Should I get more than one estimate for small home repairs?
For a short list of small repairs, one clear written estimate from someone you trust is often enough, because gathering three can take more of your time than the difference is worth. A second estimate makes sense when the job is larger, likely hides something like rot, or the first number surprises you. Whatever you collect, ask each person to describe the same scope in writing so the comparison is fair.
How do I know if a handyman quote is too high?
Start with the scope, not the number: a higher quote often includes prep, patching, paint, protection or disposal that a lower one leaves out. Ask the person to walk you through what drives the price, such as access, the condition of what’s there, materials and the number of trips. If the explanation is clear and the scope matches what you need, the quote is likely fair for that work; if they can’t explain it, get a second estimate.
What’s the cost difference between repairing something and replacing it?
There is no fixed gap, because it depends on what has failed and what a replacement involves. Repair is usually the smaller job when the item is sound and only one part has failed, such as a hinge, a latch or a rotted section of trim. Replacement adds the new item itself plus removal, fitting and often finish work around it, like trim, patching or paint. Ask for both options described on the same scope so you can see the real difference for your item.
Daniel Myers, founder of The DFW Handyman

Ask Daniel

Want a clear scope before work starts?

Send your list and a few photos. Daniel will explain how he'd price it and what's included.