The DFW Handyman®Honest Craftsmanship.

Ceiling Fan Installation and Replacement

You have a new fan still in the box, or an old one that wobbles, hums or no longer suits the room. We replace it at the existing ceiling box and set it up to run quiet and steady.

Or start from the beginning · call or text 945-222-5528

After: The new fan in place
Before: The old fan
BeforeAfter

What the request asks, and why

The details that change the job

One click each. “Not sure” is always an answer.

  1. Ceiling height and slopeIt decides the downrod length, the ladder we bring and whether a sloped adapter is needed. Tell us the rough height and whether the ceiling is flat.
  2. Whether the box is fan-ratedA fan pulls and vibrates in a way a light never does. If you can see a label inside the box, a photo of it helps.
  3. Fan size and weightLarge or heavy fans need solid support above the box. Send us the model number so we can check the weight.
  4. How the room is switchedOne switch, two switches or a remote changes the setup. Adding a switch that is not there today is electrician work.
  5. Indoor or outdoorPorch and patio fans must be rated for damp or wet locations. Check the box before you buy.

From Daniel’s jobs

Most fan jobs are replacements: an old fan or light comes down and a new fan goes up in the same spot. We start at the ceiling box, because a box made for a light is not built to carry a spinning fan. If it is not fan-rated, we tell you before anything goes up and what it takes to make that spot right. Then we assemble the fan, connect it to the existing wiring, set up the remote or wall control that came with it, and balance the blades.

Floors and furniture under the work get drop cloths, and we clean up when we are done. What we refer out: a fan where there is no ceiling box today, a new wall switch or circuit, and wiring that looks wrong, such as scorched wires or a breaker that keeps tripping. That is a licensed electrician's work. We'll tell you, and help you find the right licensed pro, then come back to hang the fan.

Photos that help: A wide photo of the room that shows the ceiling height, a close photo of the current fixture, and the new fan's box or model number.

Typical projects

  • Replacing an old fanThe old fan comes down and the new one goes up at the same box, balanced and tested.
  • Swapping a light for a fanCommon in bedrooms and living rooms, as long as the existing box can be made fan-rated.
  • Tall and vaulted ceilingsLonger downrods and sloped-ceiling adapters keep the fan level and at a comfortable height.
  • Covered porch and patio fansWe fit fans rated for damp or wet locations so they hold up outdoors.
  • Fixing a wobble or humWe tighten the mounting, check the blade arms and rebalance before anyone calls it a bad fan.
  • Remote and control kitsWe set up the remote or receiver supplied with the fan, using the wiring already in place.

Questions homeowners ask

Can you install a ceiling fan where there isn't one now?
If there is a light in that spot today, usually yes. We replace it with the fan at the existing box, after making sure the box is fan-rated. If there is no box or wiring where you want the fan, that needs a new wiring run, which is a licensed electrician's job. We'll tell you, and help you find the right licensed pro, then hang the fan once the box is in.
Do I need an electrician for a fan that wobbles?
Usually not. A wobble almost always comes from the mounting or the blades: loose screws at the bracket, a bent blade arm, or blades out of balance. We tighten and check the mounting first, then balance the blades. If the box itself is loose or not rated for a fan, we will say so and explain what it takes to fix that.
Can you replace a noisy ceiling fan without rewiring?
In most homes, yes. If the existing box is fan-rated and the wiring is in good shape, the new fan connects to what is already there. A hum can also come from the wall control rather than the fan, so tell us what kind of switch or dimmer runs it. If we find a wiring problem, we stop and refer it to a licensed electrician.
What if my ceiling box isn't rated for a fan?
Then the fan should not go up on it, even if it seems to hold at first. A fan's weight and vibration can loosen a light-only box over time. We will tell you what we see and what it takes to make that spot right before any work starts. If the fix involves new wiring, we refer it to a licensed electrician.
Can you install a fan on a tall or vaulted ceiling?
Yes. Tall ceilings usually need a longer downrod so the fan sits at a useful height, and sloped ceilings need an angled mount so it hangs level. Tell us the rough ceiling height and send a photo of the room so we bring the right ladder and can check the fan's parts list before the visit.

Guides

Hiring and pricing

Do handymen charge by the hour or by the project?

Hiring and pricing

What should a handyman refer to a licensed electrician or plumber?

Repairs around the house

What does it take to replace a ceiling fan on a high ceiling?

Repairs around the house

What should you check before buying a new light fixture?

Related services

Light Fixture Replacement and Installation

Drywall Repair and Ceiling Patching

Painting, Touch-Ups and Front Door Refinishing

Serving Dallas, Highland Park, University Park, Plano, Frisco and nearby.

Ceiling Fan Installation

A fan to replace or fix?

Ceiling height and what the fan is doing are the key details.

Rather talk first?

945-222-5528

Call or text. Photos by text are welcome.

Request a callback