Key takeaways
- New circuits, new wiring runs and any panel work go to a licensed electrician.
- New supply or drain lines, water heaters and leaks inside walls go to a licensed plumber.
- Gas work always goes to a licensed professional; if you smell gas, leave the house first.
- Replacing a fixture, switch, outlet, faucet or toilet is licensed work in Texas too, even in the same spot.
- Ask before work starts how the electrical and plumbing parts are handled, and whether a licensed electrician or plumber does them.
In this guide
Work that belongs with a licensed electrician
Electrical and plumbing work in Texas is a licensed trade, and cities set their own permit requirements on top of that. The state’s definition of electrical work is broad: it covers installing and maintaining the wiring and the equipment connected to it, so replacing a light fixture, ceiling fan, switch or outlet for a customer counts, not only new wiring. The jobs below are the clearest cases, where the system is added to or has a problem:
- Adding a new circuit, for an appliance, a workshop or outdoor power.
- Running new wiring, such as an outlet or switch where there isn't one, or a fan or light where no box and wiring exist.
- Anything inside the electrical panel, and any service upgrade.
- Breakers that trip repeatedly, lights that dim across the house, or outlets that are warm, scorched or buzzing.
- A burning smell from an outlet, switch or fixture: turn off the circuit and call an electrician.
- Older wiring you're unsure about, such as cloth-insulated wire or ungrounded outlets, deserves an electrician's evaluation before new fixtures go up.
Work that belongs with a licensed plumber
Texas licenses plumbing the same way: installing, repairing and maintaining fixtures counts, so replacing a faucet, toilet or showerhead is plumbing work even on the existing lines. Some of those replacements need no city plumbing permit, but that is a separate question from who may do the work. New lines and hidden problems are the clearest cases. If you see water where it shouldn't be and can't find the source, shut off the water at the main and call a plumber before anyone repairs the drywall or floor. A patch over an active leak just hides the next stain. Once the plumber has finished and the area has dried, a handyman can repair the wall, floor or trim.
- New supply or drain lines, or moving a sink, toilet or shower to a new spot.
- Water heater replacement or repair.
- A leak inside a wall, under a slab, or anywhere you can't see the source.
- Sewer backups, or slow drains across several fixtures at once.
- A main shutoff valve that won't close, or a sudden change in water pressure through the house.
Gas is always a licensed pro
Gas lines, gas appliance connections, gas logs and anything at the meter belong with a licensed professional, with no exceptions for small jobs. If you smell gas, don't flip switches or use your phone inside. Leave the house, then call your gas utility or 911 from outside.
Gas work also includes connecting a gas range, dryer or water heater, even when the new appliance is a straight replacement for the old one. If anyone without the right license offers to hook up a gas appliance, decline and call a licensed professional.
Not sure who should handle it? Tell Daniel about it
What a handyman commonly handles
A handyman’s work is the carpentry, drywall, doors, hardware, caulk, paint and mounting around the house, and the repairs that follow a licensed pro’s work. Light fixtures, ceiling fans, switches, outlets, faucets, showerheads and toilets are a different matter: Texas licenses that work even when the new part goes in the same spot, and the law has no minor-repair exception for someone you hire. If you own the home and live in it, Texas lets you do some electrical and plumbing work on it yourself, though city rules and permits can still apply. When you hire someone for one of those items, ask who will do the electrical or plumbing part and whether they are licensed.
Fixture jobs can also grow once the old one comes down: a box that isn’t rated for a fan or a heavy fixture, scorched or brittle wiring, connections that look improvised, or a shutoff valve that won’t hold. Each of those needs the electrician or plumber to sort it out before anything goes back up, and it’s a good sign, not a failure, when someone stops and tells you so.
Your city decides which work needs a permit and inspection. If you're unsure, call the city's building inspection office or ask the licensed electrician or plumber, who will know the local requirements. Permitted work is inspected, which protects you, and unpermitted work can raise questions when you sell or file an insurance claim.
Questions to ask any handyman
Ask these before work starts, so the answer never arrives halfway through a job:
- How do you handle the electrical and plumbing items on my list, and are those parts done by a licensed electrician or plumber?
- What will you do if you open it up and find a problem with the wiring or the box?
- Do you know a licensed electrician or plumber you’d recommend?
- Will you coordinate so the licensed work happens before your patching and painting?
How we handle the line
The DFW Handyman’s work is the carpentry, drywall, doors, hardware, paint and finish work around the house. When your list includes electrical or plumbing work, we’ll tell you up front how that part is handled on your job and who does it, and help you find the right licensed pro when you need one. That keeps the work in the right order: the electrician or plumber does their part first, and the patching, trim and paint come after. Start with Request service and list everything, including the items you're unsure about.
