The DFW Handyman®Honest Craftsmanship.

Grab Bar Installation

Someone in the house needs a steadier hand in the shower, beside the toilet or at the tub edge. We install grab bars anchored to hold real weight, placed where that person actually reaches.

Or start from the beginning · call or text 945-222-5528

Bathtub grab bars installed

What the request asks, and why

The details that change the job

One click each. “Not sure” is always an answer.

  1. What is behind the wallTile over backer board, drywall and fiberglass tub surrounds each need a different fastening. Tell us what the wall is, or send a close photo.
  2. Who will use it and howHeight, reach and the leading hand all change the placement. Tell us a little about the person and how they move.
  3. Where the studs fallStuds rarely sit exactly where the bar should go. We plan around them with blocking or rated anchors.
  4. Tile and grout conditionCracked or loose tile should be dealt with before a bar goes through it. Point out any you know about.
  5. Fiberglass or acrylic surroundsThese thin shells need anchors made for them and careful placement. Let us know if your tub or shower is one.

From Daniel’s jobs

A grab bar has to hold a person's full weight when they slip, so how it is anchored matters more than how it looks. We find the studs behind the tile or drywall and fasten into them where they line up. Where they do not, we use anchors made and rated for grab bars, or add wood blocking when the wall is open. On tile, we drill slowly with the right bit and seal each hole so water stays out of the wall.

Placement is personal. We ask who will use the bar, which hand they lead with, and how they move in and out of the tub or shower, then mark positions for you to approve. Bathtub grab bar installation is one of Daniel's own projects. Grab bars often go with other small safety fixes, such as a sturdier stair handrail or tall furniture anchored to the wall; see everyday projects.

Photos that help: A photo of each wall where a bar might go, with the tub, shower or toilet in view, and a close photo of the tile or surround.

Typical projects

  • Shower wallsBars at the entry and inside the shower, fastened through tile into solid support.
  • At the bathtubA bar at the tub edge or on the back wall for stepping in and out.
  • Beside the toiletA bar on the side wall for sitting and standing, placed at a comfortable reach.
  • Replacing a towel bar used as a grab barTowel bars are not built to hold a person; we swap in a proper grab bar.
  • Re-securing a loose grab barA bar that moves gets re-anchored into solid support or replaced.
  • Hallway and entry railsSupport rails where someone needs a hand on the way through.

Questions homeowners ask

Can you install safety grab bars for an older adult?
Yes. We start by asking how the person moves in the bathroom: stepping into the tub, standing in the shower, sitting and rising at the toilet. Then we mark positions with you, fasten the bars into studs, blocking or rated anchors, and test them. A quick walk-through afterward helps make sure each bar is where a hand naturally reaches.
Can you fix a loose grab bar in the shower?
Yes, and it is worth doing soon, because a loose bar can fail when someone needs it. Most loose bars were fastened into drywall or tile alone without solid support. We take it down, find studs or use anchors rated for grab bars, seal the old and new holes against water, and reinstall it, or replace the bar if it is worn.
Can I use a towel bar as a grab bar?
No. Towel bars are made to hold towels, not a person's weight, and they can pull out of the wall when someone grabs them. Many grab bars look good enough to double as a towel bar, so swapping one for the other is a simple change. We install it into solid support so it is ready for both jobs.
Can you drill through tile without cracking it?
Yes. We use bits made for tile, start slowly, and keep the bit cool. Drilling through grout lines is easier but often puts the bar in the wrong place, so we drill the tile where the bar should be. Each hole is sealed so water does not get behind the tile. Cracked or loose tile should be repaired before a bar goes through it.
Can you help make a home safer for aging parents?
Yes, in practical ways. Grab bars are usually the first step. Others include a solid handrail on both sides of a step, tall furniture anchored to the wall, better lighting in halls and entries, and loose hardware tightened. Walk us through the parts of the house that worry you and we'll tell you which fixes we would start with.
Can you fix a few loose bathroom accessories at the same visit?
Yes. Towel bars, toilet paper holders, robe hooks and small shelves usually work loose because they were fastened only into drywall or tile. We re-anchor them into studs or proper anchors, seal any holes through tile, and replace parts that are cracked or worn. Any towel bar that someone leans on for balance is worth replacing with a real grab bar while we are there.

Guides

Hiring and pricing

What should a handyman's workmanship warranty cover?

Repairs around the house

When should you recaulk a tub, shower or sink?

Repairs around the house

How do you install grab bars that actually hold?

Kitchen, bath and floors

Which small bathroom repairs can a handyman handle?

Related services

Picture, Mirror and Art Hanging

Carpentry: Trim, Built-Ins, Shelves and Repairs

Drywall Repair and Ceiling Patching

Serving Dallas, Highland Park, University Park, Plano, Frisco and nearby.

Grab Bars & Safety

Grab bars or a handrail where you need them?

Tell us where they go and what the wall is made of.

Rather talk first?

945-222-5528

Call or text. Photos by text are welcome.

Request a callback