The DFW Handyman®Honest Craftsmanship.

Wood Fence and Gate Repair

The gate drags, will not latch, or swings open in the wind, and a few pickets are loose or broken. We find what has moved, whether post, hinge or frame, and fix that.

What’s happening?

Or call or text 945-222-5528

After: Fence standing straight again
Before: Post rusted through at the ground
BeforeAfter
Rusted iron fence post repaired. Drag to compare.

How a repair goes

From one of Daniel’s jobs

Post rusted through at the ground
Before Post rusted through at the ground
Post section rebuilt
During Post section rebuilt
Fence standing straight again
After Fence standing straight again

See the whole project

Most wood gate trouble starts at the hinge post. When it leans or rots at the ground, the gate drops, drags and stops meeting the latch. We check the post first, then the frame and hardware, and fix whichever is failing: reset or replace the post, square the frame with a diagonal brace, replace worn hinges and latches, and rehang the gate so it swings clear and latches without a shove.

We also replace broken pickets and rails, firm up leaning sections, and fit self-closing hinges or a lockable latch. A long run of failing fence gets an on-site look first, so you know whether repair or replacement makes sense. Iron, steel and wrought-iron gates and fences are welding work, which Daniel also does; see welding. His projects include wood fence gate work as well as iron gate and fence post repairs.

Photos that help: A photo of the whole gate closed, one of the hinge post at ground level, and one of the latch side showing the gap or drag.

What changes the repair

  1. The condition of the postA post that moves when you push it, or is soft at the ground, means the fix starts there. Tell us what you feel.
  2. Gate width and weightWide or heavy gates need stronger posts and hardware. Give us a rough width.
  3. When it startedA gate that sagged after a storm or a wet season points to a different cause than slow wear.
  4. Wood or metal frameSome wood gates hang on a steel frame. Metal frame repairs are welding work, which we also do.

Typical projects

  • Sagging or dragging gatesPosts, hinges and frames corrected so the gate swings clear of the ground.
  • Latches that will not catchLatches realigned or replaced, including lockable and self-closing hardware.
  • Leaning or rotted gate postsPosts reset or replaced so the gate has something solid to hang from.
  • Broken pickets and railsDamaged boards replaced and fastened to match the rest of the fence.
  • Storm-loosened sectionsLeaning panels and loose rails made solid again.
  • Double drive gatesPairs that no longer meet in the middle, rehung and aligned.

Questions homeowners ask

Can you fix a wooden fence gate that won't latch?
Yes. A gate stops latching when something has moved: the hinge post leans, the frame sags, or the latch post shifts. Moving the latch alone hides the problem for a while. We find what moved and fix that first, then realign or replace the latch. If you want it to close and latch on its own, we can fit self-closing hinges.
Can you fix a sagging backyard gate?
Yes. We check the hinge post, the hinges and the frame. A loose post gets reset or replaced; a racked frame gets squared and braced on the diagonal, or fitted with an anti-sag kit; worn hinges get replaced with heavier ones. Then we rehang the gate so it swings clear. Daniel's projects include this kind of wood gate work.
Can you replace a rotting wooden gate post?
Yes. A rotted hinge post is one of the most common reasons a gate fails. We take the gate off, remove the old post, set a new one solidly, and rehang the gate. If the latch post or nearby fence posts are also soft, we will show you so you can decide what to do now and what can wait.
Can you replace a few broken fence pickets?
Yes. We replace broken or missing pickets and loose rails, fastened to match the rest of the fence. New wood will look different from weathered boards at first; staining or sealing helps it blend, and we can talk through that with you. If many posts are failing along a run, we'll tell you whether repair still makes sense.
Can the same person handle wood and metal gates?
Yes. Wood fences and gates are carpentry, and iron and steel gates, posts and railings are welding work, which Daniel also does. That helps when a gate mixes the two, such as wood boards on a steel frame, or a wood fence with an iron gate. See welding for metal gate repair and fabrication.
Can you install a keypad lock on a gate?
Yes, for mechanical or battery-powered keypad locks made for outdoor gates. The gate has to swing true and meet its latch post first, so we fix any sag before fitting the lock. A powered access system with an electric strike, intercom or gate opener needs wiring and belongs with a specialist; we’ll tell you, and help you find the right licensed pro. Send a photo of the latch side of the gate and the lock you are considering.
Can a warped wooden gate be repaired?
Often. If a few boards have cupped or twisted, we replace them and fasten the new ones to match. If the frame has racked out of square, we square it, add a diagonal brace or an anti-sag kit, and rehang the gate on a solid post. A gate whose frame lumber is twisted or soft is usually better rebuilt, and we’ll tell you which yours needs.

Guides

Carpentry and exterior

Why do wood fence gates sag, and how do they get fixed?

Welding and metalwork

Can a handyman fix a metal gate or iron fence?

Welding and metalwork

Custom iron and steel gates: what to decide before one is built

Repairs around the house

Can a handyman fix damage caused by pets?

Related services

Carpentry: Trim, Built-Ins, Shelves and Repairs

Siding and Exterior Trim Repair

Painting, Touch-Ups and Front Door Refinishing

Serving Dallas, Highland Park, University Park, Plano, Frisco and nearby.

Fence or Gate Repair

A gate that sags or won’t latch?

A photo of the gate and the latch side helps.

Rather talk first?

945-222-5528

Call or text. Photos by text are welcome.

Request a callback