The DFW Handyman®Honest Craftsmanship.

TV Mounting on Drywall, Brick and Stone

The new TV is leaning against the wall, or the old mount sits crooked with cords hanging down. We mount it level, into solid structure, at a height you approve before we drill.

Or start from the beginning · call or text 945-222-5528

TV and dartboard mounting

What the request asks, and why

The details that change the job

One click each. “Not sure” is always an answer.

  1. What the wall is made ofDrywall, plaster, brick and stone each take different fasteners. Tell us what you know, or send a close photo.
  2. TV size and mount typeA large TV on a full-motion arm needs more support than a small one on a flat mount. Send the model numbers of both.
  3. Height and seatingThe right height depends on where you sit and how far away. We mark it and you approve it before we drill.
  4. Where the power isIt decides which cable option works. Adding an outlet behind the TV is a licensed electrician's job.
  5. A fireplace belowHeat and a high viewing angle both matter. Check the TV maker's guidance on heat, and tell us what the mantel is made of.

From Daniel’s jobs

We mount TVs on drywall, brick and stone, along with soundbars and the small brackets that hold streaming boxes. Before drilling, we find the studs or check the masonry, mark the height while you sit where you will actually watch, and confirm the mount is rated for the TV's size and weight. On brick or stone we use masonry anchors made for the load.

For cables, there are a few honest options: a paintable cord cover on the wall, a recessed plate that passes low-voltage cords behind the drywall, or new power at the TV location. A new outlet behind the TV is electrical work, so we'll tell you, and help you find the right licensed pro, then finish the mount once it is in. Above a fireplace, we talk through heat and viewing angle before you commit. Moving a TV? We can patch the old holes too.

Photos that help: A photo of the whole wall with the furniture in front of it, a close photo of the nearest outlet, and the model numbers of the TV and mount.

Typical projects

  • Flat and tilting mountsThe everyday install on drywall, fastened into studs and checked for level.
  • Full-motion arm mountsArms put more leverage on the wall, so stud placement and fasteners matter even more.
  • Above a fireplaceWe check mantel clearance, heat and viewing height with you before choosing the mount.
  • Brick and stone wallsMasonry bits and anchors rated for the load, placed for a clean look.
  • Soundbars and devicesSoundbar brackets and small shelves mounted to line up with the TV.
  • Moving a TV to a new wallWe take down the old mount and can patch and touch up the holes it leaves.
  • Dartboards and other wall itemsAnything that needs to hang solid and level, mounted the same careful way.

Questions homeowners ask

Can you mount a TV above a fireplace?
Yes, after we check a few things with you. Heat rising from the firebox and mantel can affect the TV, so look at the maker's guidance first. Height matters too: above a fireplace the screen often sits higher than is comfortable, and a tilting or pull-down mount can help. We look at the wall, mark the position and agree it with you before drilling.
Can you install a large TV on a stone or brick wall?
Yes. Masonry takes different bits and anchors than drywall, and we choose them for the weight of the TV and mount. We plan the hole positions so the mount sits level and the fasteners land in solid material. Natural stone can be uneven, so we check how the mount will sit flat before drilling, and tell you if anything about the wall worries us.
Can you hide the TV cables without opening the whole wall?
Often, yes. Low-voltage cords such as HDMI can run behind the drywall through small recessed plates above and below the TV, with no large opening. A paintable cord cover is the simplest option on brick, stone or walls with blocking in the way. A power cord should not simply be pushed into the wall; new power at the TV is a job for a licensed electrician.
Can you mount a soundbar under the TV?
Yes. Most soundbars come with a bracket or can use one made for the TV mount. We line it up with the screen, keep it level and plan the cords so they stay as tidy as the wall allows. Bring the soundbar's model number or box so we can check the bracket and fasteners before the visit.
What if the studs aren't where I want the TV?
That happens often. Many mounts have a wide wall plate or a sliding bracket, so the TV can sit centered even when the studs are off to one side. For heavier TVs we would rather move the mount than rely on drywall anchors alone. We'll show you where the studs are and talk through the choices before drilling.

Guides

Hiring and pricing

Can I get a handyman estimate from photos?

Repairs around the house

How do you mount a TV on drywall, brick, stone or over a fireplace?

Repairs around the house

How do you hang heavy art and mirrors so they stay level?

Carpentry and exterior

Can a handyman install a mantel or decorative ceiling beams?

Moving, selling and safety

What should a handyman install when you move into a new home?

Moving, selling and safety

How do you babyproof a home so it holds up to a toddler?

Moving, selling and safety

Can a handyman assemble furniture and anchor it so it won’t tip?

Related services

Picture, Mirror and Art Hanging

Drywall Repair and Ceiling Patching

Carpentry: Trim, Built-Ins, Shelves and Repairs

Serving Dallas, Highland Park, University Park, Plano, Frisco and nearby.

TV Mounting

A TV to mount?

Wall type and screen size are all we need to start.

Rather talk first?

945-222-5528

Call or text. Photos by text are welcome.

Request a callback