The DFW Handyman®Honest Craftsmanship.

Kitchen, bath and floors

What bathroom updates can you make without a full remodel?

The surface changes that make a dated bathroom feel new without a remodel, and the point where moving fixtures or changing the layout turns it into one.

Your local expert

Hands-on since 1999 · About Daniel

The finished powder room

The finished powder room. From bathroom vanity light and mirror, one of Daniel’s projects.

Short answerMost of what makes a bathroom feel dated sits on the surface: the vanity light and mirror, the faucet, cabinet hardware, tired grout and caulk, paint, and cabinet doors that won’t close. All of these can change without touching the walls, the tub or the plumbing lines. A remodel becomes necessary when you want to move fixtures, change the layout, or take a shower down to the studs.

Key takeaways

  • Light, mirror, faucet and hardware change the look of a bathroom more than almost anything else, without demolition.
  • Several updates fit together in one visit when they’re planned as one list.
  • Water damage at a vanity starts with finding the source, before the cabinet is repaired.
  • An exhaust fan that barely moves air is worth replacing: moisture is what ruins caulk, paint and cabinets.
  • Moving a toilet, sink or shower, or adding a circuit, is remodel and licensed-trade territory.
In this guide
  1. Updates that leave the walls and plumbing alone
  2. Light, mirror and faucet together
  3. Vanity cabinets: doors, water damage and floating vanities
  4. The exhaust fan
  5. Tile, grout and caulk
  6. Where an update turns into a remodel
  7. Plan it as one list

Updates that leave the walls and plumbing alone

If the layout works and the tub and tile are sound, these updates refresh a bathroom without a remodel. The light, the exhaust fan and the faucet are electrical or plumbing work even when they reuse what is there, and Texas licenses both trades; more on that below.

  • A new vanity light and mirror, on the existing electrical box.
  • A new faucet on the existing supply valves and drain.
  • New cabinet knobs and pulls, towel bars, rings, hooks and a paper holder in one matching finish.
  • Regrouting and recaulking, so the tile looks clean and the joints keep water out.
  • Fresh paint, with a finish suited to a damp room.
  • Cabinet doors adjusted so they close and line up, and drawers that slide again.
  • A quieter, stronger exhaust fan in place of a tired one.
  • Grab bars that look like they belong, placed where hands actually reach.
  • In some cases, a new vanity cabinet on the existing plumbing.

Light, mirror and faucet together

Changing the vanity light and the faucet together is a common pairing, and it makes sense to plan them together. Both reuse what is already there, the light the existing box and the faucet the existing valves, which keeps them far simpler than adding a new location. They are still electrical and plumbing work, which Texas licenses separately. When you ask for this, ask who will do the electrical and plumbing parts and whether they are licensed; we’ll tell you how we handle it on your job. In Daniel’s vanity light and mirror project, the light went in at the existing location and the mirror was hung centered beneath it, which is what makes a small room look finished.

Before buying, check the width of the new light against the mirror and the vanity, and whether the existing box sits where you want the new fixture centered. A box in the wrong spot is a reason to rethink the fixture, since moving a box means new wiring, which is a licensed electrician’s work. What should you check before buying a new light fixture? has the full checklist, and our lighting installation page has more. For the faucet, count the holes in the sink or counter and measure between the outer ones.

The vanity back in service
The vanity back in service. From bathroom vanity repaired and reset, one of Daniel’s projects.

Vanity cabinets: doors, water damage and floating vanities

Bathroom cabinet doors that won’t shut usually need a hinge adjustment. Most modern hinges adjust in three directions with a screwdriver; older hinges may need their screw holes filled and redrilled where the wood has stripped. A door that has swollen from moisture may need its edge trimmed and sealed. Can kitchen cabinets be repaired and updated? explains door alignment in more detail.

Water damage around a bathroom cabinet starts with the source. Check the supply lines, the drain under the sink and the caulk along the top and backsplash. A failed supply line, a leaking pop-up drain or drain pipe, or anything in the wall is plumbing, which Texas licenses, so that part comes first and goes to someone licensed for it. Once the water has stopped and the cabinet has dried, a swollen bottom panel or toe kick can be replaced and the cabinet repaired or reset, as in Daniel’s bathroom vanity repair.

A floating vanity, one mounted to the wall with open floor underneath, is a popular update. It needs solid support inside the wall, which often means opening the drywall to add blocking between the studs, then patching and painting. It also has to line up with the existing water and drain connections. If those need to move to suit the new height, that part is a licensed plumber’s work, and it should be sorted out before the vanity is ordered.

Want the bathroom to feel new? Tell Daniel about it

The exhaust fan

Exhaust fans are one of the home systems Daniel watches, because moisture left in a bathroom is what breaks down caulk, peels paint and swells cabinet doors. A fan that is loud, slow to clear the mirror or barely moves a tissue held to it is worth replacing.

Replacing a fan with one that fits the existing housing, wiring and duct is the simplest version of the job, but connecting it is still electrical work, which Texas licenses. Ask who will do the electrical part and whether they are licensed; we’ll tell you how we handle it on your job. Check that the duct actually runs outside, not just into the attic. A larger fan that needs a bigger opening and duct, a fan where there is none, a new circuit, or a new vent through the roof goes further, and we’ll tell you which parts need a licensed electrician or a roofer.

Tile, grout and caulk

Clean grout and fresh caulk make old tile look cared for. Regrouting replaces stained or crumbling grout; recaulking renews the flexible joints where tile meets the tub, the floor or another wall. In Daniel’s bathtub tile surround repair, open joints where the stone tile met the tub were cleaned out and resealed along the tub and inside corners.

Tile and grout repair: what can be fixed without retiling? covers regrouting, matching and replacing a few tiles, and When should you recaulk a tub, shower or sink? covers the caulk.

Where an update turns into a remodel

The line is the plumbing and the structure. Moving the toilet, sink or shower, adding a second sink where there is one, replacing a tub with a walk-in shower, or rebuilding a shower down to the studs means new plumbing lines and often permits, which is remodel and licensed-plumber work. So is adding a circuit for heated floors or new lighting. What’s the difference between a handyman and a general contractor? explains who to call for that.

Many people find that the surface updates get them most of what they wanted. If not, they make a good first step while you plan a larger project.

Plan it as one list

Walk the bathroom and write down everything you want changed, from the light to the toilet paper holder. Note the finish you’re aiming for so the hardware, accessories and fixtures match. If you have chosen products, include links or photos of the boxes.

Send the list and a few photos through Request service. We’ll tell you what fits an update, what needs a licensed trade, and the order that makes sense.

Frequently asked questions

Can I replace a bathroom vanity without replacing the countertop?
Sometimes. If the top is a separate piece and comes off intact, it can be reset on a new or repaired cabinet of the same size. Stone tops are heavy and can crack if they are lifted carelessly, and an integrated sink-and-top usually only fits a cabinet of the same dimensions.
Will a new faucet fit my existing sink?
It will if it matches the hole layout. Count the holes in the sink or counter and measure the distance between the outer ones, then pick a faucet made for that layout. A faucet with fewer holes can often cover extras with a deck plate.
Do I need a permit to update a bathroom?
Your city decides. Moving plumbing or adding circuits often needs a permit; replacing a faucet or a toilet generally does not. Whether a permit is needed is a separate question from who may do the work: Texas licenses electrical and plumbing work, including fixture replacement. If you’re unsure about the permit, call your city’s building inspection office before work starts.
Daniel Myers, founder of The DFW Handyman

Ask Daniel

Want the bathroom to feel new?

Tell Daniel what you'd like to change and he'll explain how each part is handled.